high speed shaft
英 [haɪ spiːd ʃɑːft]
美 [haɪ spiːd ʃæft]
网络 高速轴
双语例句
- Life Prediction of the Rolling Bearing on the High Speed Shaft in Ship Unloader Trolley
卸船机小车高速轴滚动轴承寿命预测 - Application of programmable Controler in high speed crank shaft grinder
可编程控制器在高速曲轴磨床上的应用 - The high speed drilling shaft and pin cylinder system work at the same reference axis to ensure high work precision and convent operation.
高速精密钻孔主轴和钉销气缸系同基准轴线上工作，能保证工作精度高，操作方便。 - An Analysis on Driving System for High Speed Motor Car Bogies with Cardan Shaft
万向轴式动力车转向架驱动系统分析 - On the basis of the principle of magnetic fluid seals the paper has resolved the handicap of seals arising from the wiggle of high speed shaft.
利用磁流体密封原理可解决因轴高速旋转摆动带来的密封困难问题。 - Fiber sensor used in detecting radial vibration of high rotating speed shaft
用于高速转轴径向振动检测的光纤传感技术 - Measurement of extra high speed rotation shaft torque of space pumps with grating is introduced.
采用平面光栅式转矩测量的方法来测量航天叶轮泵超高速回转轴的转矩。 - The vibration and noise level of high speed reciprocated engine can be remarkably reduced with balanced shaft.
加平衡轴的方法可以显著降低高速往复式内燃机的振动和噪声。 - Measuring Principle and Dynamic Analysis of Extra High Speed Rotation Shaft Torque
超高速回转轴转矩测试原理与动态特性分析 - Because the shaft necks whirligig with high speed under high pressure, the shaft necks and bearings endure intense attrition.
曲轴的各轴颈在很高的比压下作高速旋转运动，使轴颈和轴承受到强烈磨擦。 - The components, the suspension pattern, and the structural characteristics of the driving system for high speed motor car bogies with cardan shaft are analysed systematically.
本文系统地分析了万向轴式动力车转向架驱动系统的组成、悬挂方式及万向轴的结构特点。 - The design improvement and application of the screw seal for the high speed shaft end of the gear box in a booster were presented, the leakage of lubricant oil was eliminated, and good results were obtained after improvements.
介绍了螺旋密封作为增压机变速箱高速轴端密封的设计改进及应用情况。 - Rust reason of three stage impeller of DH 90 air compressor high speed shaft rotor is set forth in detail, the material transformation is mainly set forth.
比较详细地阐述了安钢DH90空压机高速轴转子三级叶轮的锈蚀原因，重点阐述了材质改造情况。 - The paper presents a control method for High Speed Crank shaft Grinder with Mitsubishi A series of programmable controler.
介绍的是用三菱A系列可编程控制器在高速曲轴磨床上工件曲轴进行砂轮磨削的一种控制方法。 - To solve the poor economic and dynamic performance at high engine speed, a new crank shaft mechanism of air powered engine was proposed.
为解决高转速下动力与经济性能的下降，提出一种新的气动发动机曲轴连杆机构。 - The stability of transverse vibration in high speed automobile and the influence of torsional vibration, friction, damping and movement of spline shaft on vibration are discussed.
本文分析了汽车传动轴高速状态下横向振动的稳定性与扭转振动，以及摩擦力、阻尼和花键轴的运动对横向振动的影响。 - As well as the main lubrication styles of high, speed main shaft bearing-inner oil air and inner oil jet and their properties, functions, merits and defects, and suitable applications respectively.
介绍了高速主轴轴承润滑的主要方式&内环油气润滑及内环喷射润滑，给出了两种润滑方式各自的技术指标、性能特点、优缺点和适用场合。 - The high speed shaft of the coal mill gear box for the boiler in a power plant broke, and the double-row self-aligning roller bearing was damaged.
某电厂发生锅炉磨煤机变速箱高速轴断裂，双列调心滚子轴承损坏。 - The vibrational characteristics of the high speed cantilever rotor with a cracked shaft are investigated to find an optimum vibration monitoring method for a turbine rotor.
本文研究了轴具有横向裂纹的高速悬臂转子的振动特性，提出了监视此裂纹起始及发展的最佳方法。 - D reducer is a main reduction device of belt pumping unit. After running three months, the high speed gear shaft of the reducer came about fracture.
228D减速器皮带式抽油机的主减速传动装置，减速器运行3个月发生高速齿轮轴断裂事故。 - The article summarize various principle and characteristic of the measuring torque and present a method of measuring extra high speed rotation shaft torque based on grating.
文章概述了各种转矩测量的原理、特点后，提出采用光栅式转矩测量的方法来测量超高速转轴的转矩。 - For a high speed motorized spindle, the interference fit between the shaft and bearing has a great influence on the stiffness, rotary accuracy and life of the spindle.
高速电主轴轴承与转轴配合的过盈量大小对主轴的刚度、旋转精度和使用寿命具有十分重要的影响。 - Dynamics Characteristic Analysis of High Speed Electric Spindle Shaft Rotors
高速电主轴轴系转子动力学特性分析 - The high speed machining center of thermal characteristics of main shaft system is analyzed, and the temperature of the spindle of changes in the field and thermal deformation make predictions, established the thermal error prediction model. 4.
对龙门加工中心主轴系统的热特性进行分析，对机床主轴温度场的变化及热变形作出预测，建立热误差的预测模型。 - For the features of high speed ship craft shaft bracket, it established the mathematical models and mechanical models for optimal design, and carried out the optimal design with genetic algorithm.
针对高速艇尾轴架结构的特点，建立了优化设计的力学模型和数学模型，用遗传算法对其进行了优化设计。 - With this method, torward blades shimmy, gearbox torsional vibration between low speed shaft and high speed shaft, side to side dynamic vibration acceleration of tower, those signal have been analysised in time frequency and amplitude spectrum.
基于S变换的方法对风力机叶片摆振、齿轮箱上高、低速轴之间扭转振动、塔架侧向振动加速度信号进行了在时域、频率域和幅值三维坐标上的解析。 - Its advantages is little wear, low leakage and long life and so on, thus this seal is applied to some important occasions which require high pressure, high speed, such as coolant pump shaft seal of nuclear power station.
它具有磨损小、泄漏低和寿命长等优点，因此这种密封被应用于一些要求高压、高转速的重要场合，例如核电站主泵轴密封。 - At high speed condition, the shaft frequency component of transmission error has a dominate influence on dynamic load, though the gear may be in the resonance area.
在高速时，动载荷主要受传递误差轴频分量的影响。 - Therefore, this thesis presents a digital distribution and speed adjusting mechanism using several high speed on/ off solenoid valves to replace shaft distribution and plane distribution mechanism.
鉴于此，本论文提出了以多个高速电磁开关阀取代径向轴配流机构和端面配流机构的数字式配流与调速新机构。